"Akio Ohtori - RIP Oppo" (akioohtori)
06/02/2020 at 12:14 • Filed to: Project Dumpster Fire
8
6|
"Akio Ohtori - RIP Oppo" (akioohtori)
06/02/2020 at 12:14 • Filed to: Project Dumpster Fire | 8
| 6 |
With all the talk of working on the Jag... and the Land Rover... and the Alfa... sometimes even I forget about the Swedish perpetual pain in my ass that is Project Dumpster Fire, my 1984 Saab 900 Turbo sedan that I have owned (on and off) for about the last 20 years.
Well with the Jag work done and George’s Jeep’s cooling fan under recall, the front of the garage is clear for the first time in forever and behind we find a Dumpster Fire, still burning bright.
Last weekend’s project was pretty simple: I wanted to pull the distributor and replace the valve cover gasket. If that sounds like an odd pairing, it isn’t. The d istributor on an 8-valve Saab mounts to the valve cover. To get the c over off you either need to align the engine to #1 TDC, which is a pain to do because the crank pulley is against the firewall, or pull the dizzy. The last time I ordered parts I ordered 5x distributor 0-rings because I am freaking tired of not having them when I need them.
Anyway! Pulling the dizzy is easy: three 10mm bolts.
Pulling the valve cover was a little harder as I don’t think it has been off since the head gasket was done in 2001. A little love with the breaker bar and eventually I won the battle against corrosion and was treated to some shiny top end parts.
It was actually really weird to see the Saab like this. As mentioned, I’ve owned this car for a LONG time and it has been in the family even longer than that. Despite all that, I’ve never really seen the engine in any state of disassembly. The dull aluminium valve cover has always been a fixture of the engine bay and seeing it gone was... unsettling.
Anyway, everything looked.... fine... so I cleaned up the surfaces, prepped the gasket, and slammed that bad boy right back on.
But while I had the distributor out... maybe I should like... see if I can replace the pickup.
I mean.... how hard could it be?
Very.
In fact in disassembling it I quickly got to the “this is never going back together” stage of assembly. It was about the time that the distributor pickup/timing mechanism came out but the centrifugal advance didn’t.
Like I’m ever going to get those springs back together....
No good pictures here as I stopped taking them once things got... frustrating.
Oc
ne I got everything apart I determined the replacement pickup I had was the wrong one. Thanks eBay.
I did, however, find a whole bunch of crap inside the dizzy. I know the dust shield disintegrated at one point and it sure does look like a lot of that crap found its way into the centrifugal advance mechanism. Maybe this is the source of my troubles? Certainly a contributor anyway....
Luckily I remembered that I had purchased a replacement on my friend’s behalf a few years ago because he wanted a new vacuum canister and they’re hard to find. I called him up and while he didn’t have that one, he did have refurb one that he would give me.
Hooray!
But I need to wait until tomorrow to pick it up.
Understandable, but BOO.
Desperate for a win, I decided to go ahead and replace the INOP horn(s) with some Hella Supertones I had lying around. Not my preference, but I’ve had a hard time finding replacements for the Saab that guarantee a stock tone so... eff it.
Of course until this point it didn’t occur to me to like... pull the old horns and take the part numbers off them. Turns out they’re Fiamm, same as the Jag and the Alfa, but an odd part number that seems to make everyone on eBay think they’re worth their weight in gold.
Supertones it is.
They went in easy enough but for... complicated Saab reasons the Saab doesn’t have a battery right now, so testing will have to wait.
But that is where we leave the Saab for now. I’m hoping to get the new dizzy on today or tomorrow. Then, if it will let me, I’ll trot it over to my exhaust guy and weld in a bung for the wideband O2 sensor so I can finally get a AF reading and figure out WTF is going on with this bad boy.
MiniGTI - now with XJ6
> Akio Ohtori - RIP Oppo
06/02/2020 at 13:59 |
|
Perfect I wondered what happened to project dumpster fire.
I was working on my new NG900 last night - replaced the cabin air filter. Conveniently located under the windshield cowl.
Can almost see it in there under the tree bits.
glemon
> Akio Ohtori - RIP Oppo
06/02/2020 at 13:59 |
|
“for complicated reasons the Saab doesn't have a battery right now". The battery in one of your other cars crapped out and the Saab battery became a donor? Just a guess.
|
MiniGTI - now with XJ6
> Akio Ohtori - RIP Oppo
06/02/2020 at 14:01 |
|
Also interestingly the 2.0 turbo in mine has a little plug on the end of the front cam bank where the distributor went on earlier versions. It is of course leaking a little.
|
Akio Ohtori - RIP Oppo
> glemon
06/02/2020 at 14:09 |
|
Haha well ok maybe “Complicated Akio reasons”. The battery in the Saab was old and crusty. The battery in the Jag was new but the wrong size. So I used the Saab’s battery as a core to get a new battery for the Jag, with the intent of using the Jag’s “old” battery in the Saab.... but the battery is larger so is going to take some doing to get it into the Saab’s battery tray.
|
glemon
> glemon
06/02/2020 at 14:11 |
|
I was on the right track, these things happen when you own multiple old cars
Urambo Tauro
> Akio Ohtori - RIP Oppo
06/02/2020 at 19:23 |
|
It was actually really weird to see the Saab like this. As mentioned, I’ve owned this car for a LONG time and it has been in the famil y even longer than that. Despite all that, I’ve never really seen the engine in any state of disassembly.
That’s an interesting thing to think about. Just made me realize that I’ve never had the valve covers or intake off of my Mustang in the 10+ years that I’ve owned it. The only glimpse I’ve had inside the engine was when the oil pan gasket had to be replaced.